本文转自：http://www.chinasjjt.com/2014/configuration_0210/82.html

WLCNG Boot Loader Version 1.0.16 (Built on Feb 28 2011 at 13:14:54 by cisco)
Board Revision 0.0 (SN: PSZ1723047U, Type: AIR-CT2504-K9) (P)

Verifying boot loader integrity… OK.

OCTEON CN5230C-SCP pass 2.0, Core clock: 750 MHz, DDR clock: 330 MHz (660 Mhz data rate)
CPU Cores:  4
DRAM:  1024 MB
Flash: 32 MB
Clearing DRAM…….. done
Network: octeth0′, octeth1, octeth2, octeth3
‘ – Active interface
E – Environment MAC address override
CF Bus 0 (IDE): OK
IDE device 0:
– Model: 1GB CompactFlash Card Firm: CF B612J Ser#: A191103514A12x3DC2Q0
– Type: Hard Disk
– Capacity: 977.4 MB = 0.9 GB (2001888 x 512)
Press <ESC> now to access the Boot Menu…       可选：(按一下Esc键进入启动项选项)

 

 

 

 

 

============================================================
Boot Loader Menu
============================================================

1. Run primary image (7.5.102.0) – Active  （主启动镜像）
2. Run backup image (7.4.110.0)          （备份镜像）
3. Change active boot image              （更改默认启动镜像）
4. Clear configuration                    （清除配置）
5. Format FLASH Drive                   （格式化FLASH）
6. Manually update images                （手动升级镜像）

————————————————————
Enter selection: 4
Launching…
Launching images…
init started: BusyBox v1.6.0 (2009-02-03 04:56:32 EST) multi-call binary
Mount failed for selinuxfs on /selinux:  No such file or directory
starting pid 655, tty ”: ‘/etc/init.d/rcS’

Re-building configuration filesystem
Done.

Restarting system.
WLCNG Boot Loader Version 1.0.16 (Built on Feb 28 2011 at 13:14:54 by cisco)
Board Revision 0.0 (SN: PSZ1723047U, Type: AIR-CT2504-K9) (W)

Verifying boot loader integrity… OK.

OCTEON CN5230C-SCP pass 2.0, Core clock: 750 MHz, DDR clock: 330 MHz (660 Mhz data rate)
CPU Cores:  4
DRAM:  1024 MB
Flash: 32 MB
Clearing DRAM…….. done
Network: octeth0′, octeth1, octeth2, octeth3
‘ – Active interface
E – Environment MAC address override
CF Bus 0 (IDE): OK
IDE device 0:
– Model: 1GB CompactFlash Card Firm: CF B612J Ser#: A191103514A12x3DC2Q0
– Type: Hard Disk
– Capacity: 977.4 MB = 0.9 GB (2001888 x 512)
Press <ESC> now to access the Boot Menu…

Loading primary image (7.5.102.0)
100%

35799298 bytes read
Launching…
Launching images…
init started: BusyBox v1.6.0 (2010-05-13 17:50:10 EDT) multi-call binary
starting pid 677, tty ”: ‘/etc/init.d/rcS’

Generating Secure Shell DSA Host Key …
Generating Secure Shell RSA Host Key …
Generating Secure Shell version 1.5 RSA Host Key …
Detecting Hardware …
Installing ether-pow driver – 0x6008
starting pid 819, tty ‘/dev/ttyS0’: ‘/usr/bin/gettyOrMwar’
Setting up ZVM
Exporting LD_LIBRARY_PATH

Cryptographic library self-test….passed!
XML config selected
Validating XML configuration
octeon_device_init: found 1 DPs
/dev/fpga: No such device or address
readCPUConfigData: cardid 0x6060001

XML Config version file is corrupted :Move all files to tmp XML dir

XML config version file is corrupted: Removed xml dir
XML validation can not be done file open failed
sh: cannot create /mnt/application/xml/clis/XMLInvalidTagConfig.txt: nonexistent directory
Cisco is a trademark of Cisco Systems, Inc.
Software Copyright Cisco Systems, Inc. All rights reserved.

Cisco AireOS Version 7.5.102.0
Firmware Version PIC 16.0
Initializing OS Services: ok
Initializing Serial Services: ok
Initializing Network Services: ok
Initializing Licensing Services: ok

License daemon start initialization…..

License daemon running…..
Starting Statistics Service: ok
Starting ARP Services: ok
Starting Trap Manager: ok
Starting Network Interface Management Services: ok
Starting System Services: ok
Starting FIPS Features: ok : Not enabled
Starting Fastpath Hardware Acceleration: Starting Switching Services: ok
ok
Starting Fastpath Console redirect : ok
Starting Fastpath DP Heartbeat : ok
Fastpath CPU0.00: Starting Fastpath Application. SDK-1.8.0, build 269. Flags-[DUTY CYCLE] : ok
Fastpath CPU0.00: Initializing last packet received queue. Num of cores(2)
Fastpath CPU0.00: Init MBUF size: 1856, Subsequent MBUF size: 2040
Fastpath CPU0.00: Core 0 Initialization: ok
Fastpath CPU0.00: Initializing Timer…
Fastpath CPU0.00: Initializing Timer…done.
Fastpath CPU0.01: Core 1 Initialization: ok
Starting QoS Services: ok
Starting Policy Manager: ok
Starting Data Transport Link Layer: ok
Starting Access Control List Services: ok
Starting System Interfaces: ok
Starting Client Troubleshooting Service: ok
Starting Management Frame Protection: ok
Starting Certificate Database: ok
Starting VPN Services: ok
Starting DNS Services: ok
Starting Licensing Services: ok
Starting Redundancy: ok
Starting LWAPP: ok
Starting CAPWAP: ok
Starting LOCP: ok
Starting Security Services: ok
Starting Policy Manager: ok
Starting Authentication Engine: ok
Starting Mobility Management: ok
Starting Capwap Ping Component: ok
Starting AVC Services: ok
Starting Virtual AP Services: ok
Starting AireWave Director: ok
Starting Network Time Services: ok
Starting Cisco Discovery Protocol: ok
Starting Broadcast Services: ok
Starting Logging Services: ok
Starting DHCP Server: ok
Starting IDS Signature Manager: ok
Starting RFID Tag Tracking: ok
Starting RF Profiles: ok
Starting Power Supply and Fan Status Monitoring Service: ok
Starting Mesh Services:  ok
Starting TSM: ok
Starting CIDS Services: ok
Starting Ethernet-over-IP: ok
Starting DTLS server:  enabled in CAPWAP
Starting CleanAir: ok
Starting WIPS: ok
Starting SSHPM LSC PROV LIST: ok
Starting RRC Services: ok
Starting SXP Services: ok
Starting Alarm Services: ok
Starting FMC HS: ok
Starting IPv6 Services: ok
Starting Config Sync Manager : ok
Starting Hotspot Services: ok
Starting Portal Server Services: ok
Starting mDNS Services: ok
Starting Management Services:
Web Server:    CLI:    Secure Web: Web Authentication Certificate not found (error). If you cannot access management interface via HTTPS please reconfigure Virtual Interface.

(Cisco Controller)
Welcome to the Cisco Wizard Configuration Tool
Use the ‘-‘ character to backup
Would you like to terminate autoinstall? [yes]: yes    （是否使用自动安装）

System Name [Cisco_a5:df:84] (31 characters max):
AUTO-INSTALL: process terminated — no configuration loaded
CT-SJJT                                         （控制器名字）
Enter Administrative User Name (24 characters max): cisco     （管理员用户名）
Enter Administrative Password (3 to 24 characters): *********    （管理员密码）
Re-enter Administrative Password                 : *********   （再次输入管理员密码）

Enable Link Aggregation (LAG) [yes][NO]: yes       （是否启用链路聚合）

Management Interface IP Address: 192.168.1.10     （管理接口IP）
Management Interface Netmask: 255.255.255.0      （管理接口地址掩码）
Management Interface Default Router: 192.168.1.1    （管理接口地址网关）
Management Interface VLAN Identifier (0 = untagged): 回车或者输入VLAN ID，0代表vlan 1
Management Interface DHCP Server IP Address: 192.168.1.1   （管理接口DHCP服务器地址）

Virtual Gateway IP Address: 1.1.1.1     （虚拟IP）

Multicast IP Address: 239.1.1.1     （组播IP）

Mobility/RF Group Name: SJJT       （RF组名称）

Network Name (SSID): SJJT        （SSID名称）

Configure DHCP Bridging Mode [yes][NO]: NO    （是否启用DHCP桥接模式）

Allow Static IP Addresses [YES][no]: YES       (是否允许AP使用静态IP)

Configure a RADIUS Server now? [YES][no]: NO   （是否配置RADIUS服务器）
Warning! The default WLAN security policy requires a RADIUS server.
Please see documentation for more details.

Enter Country Code list (enter ‘help’ for a list of countries) [US]: CN,US,IT   （输入AP国家代码）
Enable Auto-RF [YES][no]: YES     （是否允许自动射频）

Configure a NTP server now? [YES][no]: no   （是否配置NTP服务器）
Configure the system time now? [YES][no]: yes   （是否配置系统时间）
Enter the date in MM/DD/YY format: 12/16/13     （输入月/日/年）
Enter the time in HH:MM:SS format: 12:06:30       输入时：分：秒

Configuration correct? If yes, system will save it and reset. [yes][NO]: yes （是否配置正确并重启）

Configuration saved!
Resetting system with new configuration…